- 5 Résultats
prix le plus bas: € 148,89, prix le plus élevé: € 208,60, prix moyen: € 168,62
1
Solid Mechanics - J. P. Ward
Commander
sur AbeBooks.de
€ 208,60
Envoi: € 0,001
Commander
Détails du fournisseur
Lien sponsorisé
J. P. Ward:

Solid Mechanics - Livres de poche

2010, ISBN: 9048141990

[EAN: 9789048141999], Neubuch, [PU: Springer Netherlands Dez 2010], EIGENVALUE; CALCULUS; EIGENVECTOR; FINITEELEMENTMETHOD; MINIMUM, This item is printed on demand - it takes 3-4 days lon… Plus…

NEW BOOK. Frais d'envoiVersandkostenfrei. (EUR 0.00) BuchWeltWeit Inh. Ludwig Meier e.K., Bergisch Gladbach, Germany [57449362] [Rating: 5 (von 5)]
fermer(X)
2
Solid Mechanics : An Introduction - J. P. Ward
Commander
sur AbeBooks.de
€ 152,61
Envoi: € 0,001
Commander
Détails du fournisseur
Lien sponsorisé

J. P. Ward:

Solid Mechanics : An Introduction - Livres de poche

2010, ISBN: 9048141990

[EAN: 9789048141999], Neubuch, [PU: Springer Netherlands], EIGENVALUE; CALCULUS; EIGENVECTOR; FINITEELEMENTMETHOD; MINIMUM, Druck auf Anfrage Neuware - Printed after ordering - This book … Plus…

NEW BOOK. Frais d'envoiVersandkostenfrei. (EUR 0.00) AHA-BUCH GmbH, Einbeck, Germany [51283250] [Rating: 5 (von 5)]
fermer(X)
3
Solid Mechanics: An Introduction: 15 (Solid Mechanics and Its Applications, 15) - Ward, J.P.
Commander
sur amazon.co.uk
£ 129,99
(environ € 148,89)
Envoi: € 0,001
Commander
Détails du fournisseur
Lien sponsorisé
Ward, J.P.:
Solid Mechanics: An Introduction: 15 (Solid Mechanics and Its Applications, 15) - Livres de poche

2010

ISBN: 9789048141999

Springer, Paperback, Auflage: Softcover reprint of hardcover 1st ed. 1992, 294 Seiten, Publiziert: 2010-12-09T00:00:01Z, Produktgruppe: Book, 0.42 kg, Mechanics, Civil Engineering, Engine… Plus…

Frais d'envoiIn stock, Lieferung von Amazon. (EUR 0.00) Amazon.co.uk
fermer(X)
4
Solid Mechanics: An Introduction: 15
Commander
sur Amazon.nl
€ 160,49
Envoi: € 0,001
Commander
Détails du fournisseur
Lien sponsorisé
Solid Mechanics: An Introduction: 15 - Livres de poche

2010, ISBN: 9789048141999

auteur: Ward, J.P. Springer, Paperback, Auflage: Softcover reprint of hardcover 1st ed. 1992, 294 Seiten, Publiziert: 2010-12-09T00:00:01Z, Produktgruppe: Book, 0.92 kg, Machinebouw, Mech… Plus…

Frais d'envoiOp voorraad, Lieferung von Amazon. (EUR 0.00) Amazon.nl
fermer(X)
5
Commander
sur AbeBooks.co.uk
£ 150,62
(environ € 172,52)
Envoi: € 61,531
Commander
Détails du fournisseur
Lien sponsorisé
Ward, J.P.:
Solid Mechanics: An Introduction (Solid Mechanics and Its Applications, 15) - Livres de poche

2010, ISBN: 9048141990

[EAN: 9789048141999], New book, [SC: 61.53], [PU: Springer], Books

NEW BOOK. Frais d'envoi EUR 61.53 Lucky's Textbooks, Dallas, TX, U.S.A. [60577173] [Rating: 5 (of 5)]
fermer(X)
1Comme certaines plateformes ne transmettent pas les conditions d'expédition et que celles-ci peuvent dépendre du pays de livraison, du prix d'achat, du poids et de la taille de l'article, d'une éventuelle adhésion de la plateforme, d'une livraison directe par la plateforme ou via un prestataire tiers (Marketplace), etc. il est possible que les frais de livraison indiqués par eurolivre ne correspondent pas à ceux de la plateforme qui propose l'article.

Données bibliographiques du meilleur livre correspondant

Détails sur le livre
Solid Mechanics: An Introduction: 15
Auteur:
Titre:
ISBN:

9048141990


This book is a concise and readable introductory text on solid mechanics suitable for engineers, scientists and applied mathematicians. It presents the foundations of stress, strain and elasticity theory and consistently employs the use of vectors and (particularly) Cartesian tensor notation. The first chapter introduces vectors with particular emphasis being paid to applications which arise in later chapters. Chapter 2 introduces Cartesian tensors and describes some of their important applications. In particular, finite and infinitessimal rotations are examined as are isotropic tensors and second order symmetric tensors. The last topic of this chapter includes a full discussion on eigenvalues and eigenvectors. There are separate introductions, in Chapters 3 and 4, to stress and strain and to their practical measurement using, respectively, photoelastic methods and strain gauges. In Chapter 5 the concepts of stress and strain are brought together and, in conjunction with Newton's equilibrium equations, used to deduce the basic equations of linear elasticity theory. These fundamental equations are then examined and analyzed by obtaining simple exact solutions, including solutions which describe twisting, bending and stretching of beams. Chapter 6 introduces the fundamental concept of strain enegergy and uses this concept to derive the Kirchoff uniqueness theorem, Rayleigh's reciprocal theorem and the important Castigliano relations. The chapter concludes with a thorough treatment of the theorem of minimum potential energy and examines some of its applications. The final three chapters examine the application of the fundamental equations to the theory of torsion, to structural analysis and to the treatment of two dimensional elastostatics by analytical and approximate (finite element) methods.

Informations détaillées sur le livre - Solid Mechanics: An Introduction: 15


EAN (ISBN-13): 9789048141999
ISBN (ISBN-10): 9048141990
Version reliée
Livre de poche
Date de parution: 2010
Editeur: Springer
296 Pages
Poids: 0,450 kg
Langue: eng/Englisch

Livre dans la base de données depuis 2011-05-10T06:04:41+02:00 (Zurich)
Page de détail modifiée en dernier sur 2023-11-03T19:36:06+01:00 (Zurich)
ISBN/EAN: 9048141990

ISBN - Autres types d'écriture:
90-481-4199-0, 978-90-481-4199-9
Autres types d'écriture et termes associés:
Auteur du livre: ward
Titre du livre: mechanics

Données de l'éditeur

Auteur: J.P. Ward
Titre: Solid Mechanics and Its Applications; Solid Mechanics - An Introduction
Editeur: Springer; Springer Netherland
284 Pages
Date de parution: 2010-12-09
Dordrecht; NL
Imprimé / Fabriqué en
Langue: Anglais
160,49 € (DE)
164,99 € (AT)
177,00 CHF (CH)
POD
X, 284 p.

BC; Hardcover, Softcover / Physik, Astronomie/Mechanik, Akustik; Klassische Mechanik; Verstehen; Eigenvalue; calculus; eigenvector; finite element method; mechanics; minimum; Classical Mechanics; Mechanical Engineering; Analysis; Technology and Engineering; Maschinenbau; Mathematische Analysis, allgemein; Ingenieurswesen, Maschinenbau allgemein; BB

1 Vectors.- 1.1 Introduction to vector algebra.- 1.2 The scalar product.- 1.3 The vector product.- 1.4 Applications of vectors to forces.- 1.5 Triple products.- 1.6 The index notation for vectors.- 1.7 Vector differential calculus.- 1.8 Vector integral calculus.- 2 Cartesian Tensors.- 2.1 Introduction.- 2.2 Rotation of Cartesian coordinates.- 2.3 Cartesian tensors.- 2.4 Properties of tensors.- 2.5 The rotation tensor.- 2.6 Isotropic tensors.- 2.7 Second order symmetric tensors.- 3 The Analysis of Stress.- 3.1 Introduction.- 3.2 The stress tensor.- 3.3 Principal axes.- 3.4 Maximum normal and shear stresses.- 3.5 Plane stress.- 3.6 Photoelastic measurement of principal stresses.- 4 The Analysis of Strain.- 4.1 The strain tensor.- 4.2 Physical interpretation of the strain tensor.- 4.3 Principal axes, principal strains.- 4.4 Principal strains and the strain rosette.- 4.5 The compatibility equations for strain.- 5 Linear Elasticity.- 5.1 Hooke’s law and the simple tension experiment.- 5.2 The governing equations of linear eleasticity.- 5.3 Simple solutions.- 5.4 The Navier equation in linear elasticity.- 6 Energy.- 6.1 Strain energy and work.- 6.2 Kirchoff’s uniqueness theorem.- 6.3 The reciprocal theorem.- 6.4 The Castigliano theorem.- 6.5 Potential energy.- 7 The General Torsion Problem.- 7.1 Introduction.- 7.2 The torsion function.- 7.3 Shearing stress in the torsion problem.- 7.4 Simple exact solutions in the torsion problem.- 7.5 Approximate formulae in the torsion problem.- 8 The Matrix Analysis of Structures.- 8.1 Introduction.- 8.2 Pin-jointed elements.- 8.3 Two and three dimensional pin-jointed structures.- 8.4 Beam elements.- 8.5 Equivalent nodal forces.- 9 Two Dimensional Elastostatics.- 9.1 Plane strain, plane stress and generalised plane stress.- 9.2 Exactsolutions to problems in plane strain.- 9.3 Approximations in two dimensional elastostatics.- Appendix 1 The Variational Calculus.- A1.1 The fundamental lemma.- A1.2 Functionals and the variational calculus.- A1.3 Construction of functionals.- A1.4 One dimensional fourth-order problems.- A1.5 Variational formulation of fourth-order problems.- References.

Autres livres qui pourraient ressembler au livre recherché:

Dernier livre similaire:
9780792319498 Solid Mechanics: An Introduction (Solid Mechanics and Its Applications, 15) (Ward, J.P.)

< pour archiver...